Alhak Quality inspection Services

minute investigation Quality inspection

Welcome to Alhak Quality Inspection Services

Company Profile

Located in, what can be called as, the heart of The Industrial Twin-Township of Pimpri Chinchwad, Alhak Quality Inspection Services (AQIS) may seem like a new name to some. However, AQIS is born out of over 25 years of experience in the field of Non Destructive Testing.

Alhak Quality Inspection Services is supported by experience professional; it deploys qualified NDT professional and approved Equipments for Radiography, Ultrasonic Testing, Magnetic Particle Testing, Liquid Penetrant Testing, Visual Inspection and Positive Material Identification.

With humble beginning, Alhak quality Inspection Services, The Company has been founded by Mr. T. S. Pangare, who has over 25 years of experience in various NDT methods, he has been ASNT Level III in MT method. Mr. Pangare has been providing his expertise in Non Destructive Testing Services to various industrial Sectors like. Automobile, Engineering, Foundry, Marine, Nuclear, Oil & gas, Power,

We are one of the highly professional company that provide an extensive range of NDT services with affordable competitive price.

Alahk quality Inspection services are dedicated to quality through excellence of their people and performance of their services. All the inspection done by qualified experience Level II person with proper procedure and follow the codes and standard’s then finally issue examination reports with prier test investigation.

AQIS started with its services on a very small level having work forces of employees with the hard work to achieve the following object for providing Indian industries with variety of NDT testing services

» Customer Satisfaction

» Innovation

» Integrity and Excellence

» Efficiency

» Total Quality

We provide NDE and inspection services not just at our Pune facility, but also at customer’s sites / premises as per requirement.

Our Vision

To contribute Industry and Society by providing quality, quick, accurate inspection services and testing services so as to grow through satisfaction of our customer as well as our employees.

We have aggressive plans for the future, including expanding our services to include RT with Co 60, CR /DR, UT-Phase Array, TOFD, Chemical testing, Mechanical testing, Mobile Testing Vehicle and Casting Upgradation.

Helth Safety And Envornment Policy

At AQIS the following principles govern the management of our Health Safety and Environmental Issues:

We shall appraise the risks of all occupational hazards, including work injury and occupational ill health, related to all our functions.

We shall carry out all our operations with due consideration to safety, and as per regulations.

We shall identify the environmental impact of our activities. We shall use material resources responsibly in order to achieve sustainable growth but at the same time we shall respect the environment and the rights of future generations.

We do not and shall not engage in or support the use of child labour and forced labour.

We shall co-operate with local and national regulations and legislations related to our operations.

Codes And Standerds

AQIS is equipped and capable of working with the following Codes and Standards:




» IBR-1950


Our Mission

AQIS is started with a mission to provide the best integrated inspection solution for core sectors worldwide; our goal is to maximizing your plant’s uptime by minimizing down time with fast, consistence, reliable inspection technique. We offer capabilities to make your plant more competitive, we are committed to growing the industry through innovative testing solution and strong relationship with the industry.

Work Under Third Party Inspection Agency










» L&T










AQIS has a full fledged office, darkroom, and source storage & enclosure facilities for Radiographic Testing in the heart of Bhosari Industrial Estate in Pune, India. All these facilities are also available at the Kolhapur branch of AQIS.

Equipment Calibration

All our equipments are calibrated as per the set codes. All reference test pieces for establishing system performance for various NDE are available with Alhak Quality Inspection Services.

Non-Distructive inspection services

Rediography Testing (Gamma Ray Ir 192 )

Industrial radiography is a method of NDT. Where many types of manufactured components can be examined to verify the internal structure and integrity of the components. Industrialradiography can be performed utilizer either x-ray or Gamma ray with several Imaging method, techniques to display the final image i.e. film radiography, real time radiography (RTR) Computer Radiography(CR) computed Tomography (CT) Digital radiography (DR)

Ultrasonic Thickness Gauging

Ultrasonic Testing uses high Frequency solved energy is conduces examination make measurement used for flow selection /evaluation dimensional measurement material characterization widely use for raw material to in service inspection, Benefit:- only one side access is needed. - Highly accurate indeterminate position estimation size & shape. - Divides instant result. -Detailed images can be produced with advance systems. Advance Technique- Phase Array andToFD.

Magnetic partical Testing

This NDT method is accomplished by inducemagnetic field in a ferro magnetic material and simultaneously dusting the test surface with iron partials, irons partial attracted at sites of the defect. Magneticflux leakages, this produces a visible indication of surface of the material, mostly used are for find out surface and subsurface discontinuities.

Liquid Penetrant Testing

Liquidpenetrant testing method basically based on capillary action, used to several surface briefly flaws by blecdanter a cleared aflorescent dye from the flow, its popularity can be attributed to main factor. Its relative ease of use and its flexibility, it widely used for any material provides that its surface is not extremely enough are porous.

Positive Material Identification (PMI)

PMI provides a quick and reliable way of getting the necessary information quickly. If a company uses steels, metals, or alloys, positive material identification allows for confidence is the process and purchasing decisions. PMI also helps assure these choices are cost effective, too. • Research & Development – During research and development, positive material identification helps when choosing the right materials for an application from this complex and expanding selection. • Production – During production, PMI can help to confirm via certification that a customer has received the materials they have paid for. Conclusion PMI is useful to test the composition of metal alloys throughout all phases of the production process. By using one of the multiple non-destructive testing techniques, you can quickly and cost effectively test alloys to ensure they are what you ordered and are safe to use. To ensure the results, PMI testing should be conducted by a professionally trained individual on your staff or by using a LAB certified company.

Porteble Hardness Testing

Hardness testing is a widely used form of materials test. It's relatively easy to perform, it's typically minimally or completely non-destructive, and most of the instrumentation is inexpensive by comparison to other types of material verification equipment. In addition, it can usually be performed directly on the component without significant alteration.

Visual Testing

Visual testing is the oldest, cheapest & most common NDTtechniques; it is typically the every step in every examination process to inspect a variety of products inIndustry.

Vibration Analysis

Vibration analysis may be undertaken as a stand-alone process, or may be part of a machine section audit or comprehensive machine analysis. Regardless of the scope of the study, a similar process will be Followed. The objective is established, a work plan is created, data is gathered using specific tools and Sensors, and detailed analyses are carried out.

Ra Value (Surface Roughness)

Consider the surfaces of machined parts that you see all around you. These surfaces come in a wide variety of surfaces, from shiny and smooth to rough and matte. These outer differences are because of the different surface roughness of each part. Surface roughness is defined as the shorter frequency of real surfaces relative to the troughs. If you look at machined parts, you will notice that their surfaces embody a complex shape made of a series of peaks and troughs of varying heights, depths, and spacing. Surface roughness is greatly affected by the microscopic asperity of the surface of each part.

Temperature Indicator

Temperature indicators are installation instruments which can process signals from temperature sensors and show them on the display. Temperature indicators enable easy and economic valuation of resistance sensors, such as Pt100 or different thermo element types. These sensors can be directly connected to temperature indicators to avoid the installation of a transducer.

Tachometer - RPM Testing

A tachometer is an instrument measuring the rotation speed of a shaft or disk, as in a motor or other machine. The device usually displays the revolutions per minute (RPM) on a calibrated analogue dial, but digital displays are increasingly common.

Welder Qualification Services

Welding Certifications are technically a hands-on welder qualification test that is conducted by certified welding inspector that will determine if the person or machine can produce a sound quality weld up to the code or welding procedure needed for a Company, job site or a particular industry standard.

Job Inspection doing

Some type of job inspection as mentioned below

» All graded Casting

» Boilers

» Brewery Tanks

» Cranes

» CNG Skids

» Defence Components

» Heat Exchangers

» Marian Components

» Nuclear vessels like Primary & Secondary Sodium Pumps.

» Oil & Gas skids

» Pressure Vessels

» All type of piping

» Wind mill components


Happy clients


Awards won


Cups of Coffee


Projects completed

Quality Policy

We, Alhak Quality Inspection Services, shall strive to render faultless and professional service in time and at appropriate cost to enhance customer satisfaction.

Our Quality System shall be our guide and standard for improving the quality of each and every process in our organization.

We shall strive to render all services as per the set standards and to make our services truly world class.

We shall ensure that all our team members are familiarized with our policies and procedures and those they implement and achieve the related goals.

It shall be our prime responsibility to comply with the requirements of ISO/IEC 17025, and continually improve the effectiveness of this Quality System.

Our Core Customers

We are working with major industries some customer as mentioned:

» Ashta Liners Pvt.Ltd.

» Bechtochem Consultant Pvt. Ltd.

» Centpro

» Chemdist Engg.

» FIE Sphrotech

» General Machine Tools.

» Iconic Casting Pvt. Ltd.

» Kirloskar Ebara Pumps Pvt. Ltd.

» Kasturi Foundry Pvt. Ltd.

» Kaybouvet Engg Ltd.

» Kolhapur Alloys.

» Mateen Fabricators.

» Qualitas Exportes.

» Rajdeep Engg. Pvt. Ltd.

» Ross Process Equipment Pvt. Ltd.

» Mahalaxmi Boilers.

» Minda Industries.

» Menon & Menon Ltd.

» Mutha Engg Pvt. Ltd.

» Mutha Founders Ltd.

» Neeta Instruments Pvt. Ltd.

» Paras Founders Pvt. Ltd.

» Parikh Metallicks Pvt. Ltd.

» S. J. Iron Pvt. Ltd.

» Samrath Foundry Pvt. Ltd.

» Samarth Engineering.

» Shri Ram Foundry Ltd.

» S. N. Casting Ltd.

» Sopan O & M Co Pvt. Ltd.

» Standard Plate & Vessals Pvt. Ltd.

» Riddhi Siddhi Technical Services

» Thermotech Engg.Pune Pvt. Ltd.

» Tejas International.

Contact And Other Details

Alhak Quality Inspection Services

Head Office

River Residency, Gat No. 90, I 903 Dehu Alandi Road, Chikhali Pune – 411062

Pune Works


J Block, Plot 431, MIDC, Bhosari, Pune – 411026.



+91-9850035551, 020-66002569.

Kolhapure Works


R.S. No.578, Hissa 4,Plot No-4, Shiroli, Tal-Hatkangale, District Kolhapur - 416 122.



+91-9850035661 / 9822937161

Our Bank:

Union Bank of India